Asset Management Forms
The 25 forms that track an AGL asset from identification and commissioning through operation, inspection, maintenance, modification, failure, upgrade, replacement and final disposal — grouped into Identification & Registration, History & Condition, Lifecycle Control, Warranty & Calibration, Risk & Performance, and Failure & Cost History. Every form follows the same 15-field skeleton used across the library.
Where this fits — the Asset Register tells you what assets you have; Division 11 tells you where they are, what condition they're in, how they've performed, what they've cost, what has failed, what risk they carry, and when they should be repaired, upgraded or replaced. It is the master reference layer that Division 05 (Inspection), Division 06 (Testing), Division 08 (Maintenance), Division 09 (Failure Investigation) and Division 10 (QA/QC) all feed into.
A · Identification & Registration
4 of 4 formsAM-01 Asset Register Register
Purpose
The master controlled register of every AGL asset — the single source of truth that other Division 11 forms point back to by Asset ID.
Asset Identification
- Asset ID
- Asset type
- Asset description
- Asset category
- Manufacturer
- Model
- Serial number
- Part number
- Equipment rating
- System / subsystem
Location
- Airport / project
- Airfield area
- Runway / taxiway
- Location
- Grid / reference
- Circuit ID
- CCR ID
- Associated equipment
Lifecycle Information
- Installation date
- Commissioning date
- Warranty start
- Warranty expiry
- Expected service life
- Current condition
- Current status
- Replacement due date
Management & Status
- Criticality
- Risk rating
- Asset owner
- Responsible department
- Maintenance responsibility
- Status: Active / Standby / Under maintenance / Out of service / Replaced / Disposed
AM-02 Asset Identification Form Form
Purpose
Creates the initial technical identity of a newly installed or received asset, verified against its nameplate before it's admitted to the register.
Fields
- Asset Identification No.
- Equipment type
- Manufacturer
- Model
- Serial number
- Part number
- Rating
- Specification
- Purchase reference
- PO number
- Installation location
- Installation date
- Commissioning date
Verification
- Nameplate verified
- Serial number verified
- Model verified
- Documentation available
- Asset ID assigned
Approval
- Asset Engineer
- QA/QC
- Maintenance
- Asset Manager
AM-03 Asset Tagging Record Record
Purpose
Controls the physical identification and tagging of AGL assets, confirming the tag on the equipment matches the register entry.
Tag Information
- Asset ID
- Tag number
- Equipment
- Location
- Tag type
- Tag material
- Tag installation date
Verification
- Tag installed
- Tag readable
- Tag securely fixed
- Asset ID matches register
- Serial number matches
- Location matches
Record
- Installed by
- Verified by
- Date
- Photograph / reference
AM-04 Asset Location Record Record
Purpose
Establishes the exact physical location and system relationship of an asset, and tracks every subsequent relocation.
Location Data
- Asset ID
- Airport
- Airfield area
- Runway / taxiway
- Chainage / reference
- Grid / reference
- Coordinates where applicable
- Equipment room / CCR room
- Circuit
- Associated asset
Location Verification
- Drawing reference
- As-built reference
- Site verification
- GIS / location reference where available
Change History
- Previous location
- New location
- Reason for change
- Date
- Authorized by
B · History & Condition
4 of 4 formsAM-05 Asset Inspection History History Log
Purpose
Maintains the complete inspection history of an asset — every daily, weekly, periodic, special and post-repair inspection in one traceable log.
Log Fields
- Date
- Asset ID
- Inspection type
- Inspector
- Condition
- Defect
- Action
- Reference
Inspection Types
- Daily
- Weekly
- Monthly
- Quarterly
- Annual
- Special inspection
- Post-failure
- Post-repair
- Condition assessment
History
- Inspection date
- Findings
- Defects
- Recommendations
- Closure status
AM-06 Equipment History Card History Card
Purpose
A detailed lifetime history card for individual critical equipment — maintenance, failure, repair, testing and modification in one place, cross-referenced with the Maintenance History and Failure Investigation records.
Identification
- Asset ID
- Equipment
- Manufacturer
- Model
- Serial number
- Location
- Installation date
- Commissioning date
History
- Maintenance
- Failure
- Repair
- Replacement
- Testing
- Modification
- Upgrade
- Calibration where applicable
- Warranty claim
Reliability
- Failure count
- Downtime
- MTBF
- MTTR
- Repeat failure count
AM-07 Asset Condition Record Record
Purpose
Documents the physical and operational condition of an asset at a defined point in time, across physical, electrical and operational categories.
Physical / Electrical / Operational
- Housing, corrosion, damage, cleanliness, mounting, cable/connection
- Insulation, connections, earthing, current/voltage, protection
- Function, performance, availability, alarms
Condition Rating
- Excellent
- Good
- Fair
- Poor
- Critical
Action
- Continue operation
- Monitor
- Repair
- Upgrade
- Replace
AM-08 Asset Health Record Record
Purpose
Establishes an overall health assessment of the asset using available condition, inspection, testing, maintenance and failure information.
Inputs
- Age
- Condition
- Inspection history
- Test results
- Failure history
- Maintenance frequency
- Operating hours
- Performance
- Environment
- Criticality
Health Rating
- H1 — Healthy: normal operation
- H2 — Good: minor deterioration
- H3 — Degraded: increased monitoring required
- H4 — Poor: corrective action / replacement planning required
- H5 — Critical: immediate engineering intervention required
Output
- Health score
- Health trend
- Recommended action
- Review date
C · Lifecycle Control
7 of 7 formsAM-09 Asset Lifecycle Record Record
Purpose
Documents the complete lifecycle of an asset through every stage, from planning to disposal, with a date, event, document reference and cost against each.
Lifecycle Stages
- Planning
- Procurement
- Installation
- Commissioning
- Operation
- Maintenance
- Modification / upgrade
- Replacement
- Disposal
Record
- Asset ID
- Lifecycle stage
- Date
- Event
- Document reference
- Cost
- Condition
- Responsible person
AM-10 Asset Transfer Form Form
Purpose
Formally transfers an asset between locations, departments, systems or responsible parties, capturing its condition at the point of transfer.
Transfer Details
- Asset ID
- Equipment
- Current location
- New location
- Current custodian
- New custodian
- Transfer date
- Reason
Condition at Transfer
- Physical condition
- Operational condition
- Accessories
- Documentation
- Spare parts
Acceptance
- Transferred by
- Received by
- Verified by
- Date
AM-11 Asset Handover Record Checklist
Purpose
Formally transfers completed assets from project / construction into operations and maintenance, gated on a complete documentation checklist.
Handover Information
- Asset ID
- Equipment
- Location
- Project
- Installation date
- Commissioning date
Handover Documents
- Approved drawings
- As-built drawings
- Test reports
- Commissioning records
- O&M manuals
- Warranty documents
- Spare-parts information
- Asset register
- Training records
- Certificates
Acceptance
- Project
- Engineering
- Maintenance
- Operations
- Asset Management
AM-12 Asset Modification Record Record
Purpose
Records any approved physical, electrical, mechanical or control-system modification to an asset, and the technical impact it carries.
Modification Details
- Asset ID
- Existing configuration
- Proposed modification
- Reason
- Design reference
- Approval reference
- Date
Technical Impact
- Electrical
- Mechanical
- Photometric
- Control
- Safety
- Maintenance
- Reliability
Completion
- Modification completed
- Testing completed
- Drawings updated
- Asset register updated
- O&M documentation updated
AM-13 Asset Upgrade Record Record
Purpose
Documents improvement or modernization of an existing asset — the technical justification, expected benefit, and completion sign-off.
Upgrade Information
- Asset ID
- Existing equipment
- Existing condition
- Upgrade requirement
- New equipment / component
- Technical justification
- Expected improvement
Benefits
- Reliability
- Energy efficiency
- Performance
- Maintainability
- Safety
- Availability
- Lifecycle extension
Completion
- Installation
- Testing
- Commissioning
- Documentation update
- New warranty
AM-14 Asset Replacement Record Record
Purpose
Documents replacement of an existing asset with a new asset — the justification for retiring the old one and the closure of the changeover.
Existing Asset
- Asset ID
- Equipment
- Manufacturer
- Model
- Serial number
- Installation date
- Age
- Failure history
- Condition
Replacement Justification
- End of life
- Repeated failures
- Obsolescence
- Poor performance
- Safety concern
- Spare availability
- Lifecycle economics
New Asset & Closure
- New Asset ID, manufacturer, model, serial number
- Installation date, warranty, expected life
- Old asset removed / new asset commissioned
- Asset register updated, history transferred, old asset disposal initiated
AM-15 Asset Disposal Record Record
Purpose
Formally documents the retirement and disposal of an asset, including the disposal method and the closure of its register entry.
Asset Information
- Asset ID
- Equipment
- Manufacturer
- Model
- Serial number
- Location
- Installation date
- Retirement date
Disposal Reason
- End of life
- Failure
- Obsolescence
- Upgrade
- Replacement
- Damage
- Safety issue
Disposal Method & Closure
- Returned to supplier / scrap / recycled / stored / salvaged / other approved method
- Asset removed, register updated, records archived, replacement linked, disposal approval obtained
D · Warranty & Calibration
3 of 3 formsAM-16 Warranty Register Register
Purpose
Centrally tracks warranty coverage for AGL assets and equipment, with expiry alerts so cover isn't missed before a claim is needed.
Fields
- Asset ID
- Equipment
- Manufacturer
- Warranty start
- Warranty end
- Warranty type
- Status
Track
- Warranty period
- Warranty conditions
- Supplier
- Contact
- Claim history
- Expiry alerts
- Warranty extensions
Management
- Warranty expiring
- Warranty expired
- Active warranty
- Claim pending
AM-17 Warranty Claim Form Form
Purpose
Formally submits and tracks a warranty claim against a supplier for a failed asset still within its warranty period.
Claim Information
- Claim No.
- Asset ID
- Equipment
- Manufacturer
- Serial number
- Warranty reference
- Failure date
- Failure description
Evidence
- Photographs
- Test results
- Failure report
- Maintenance history
- Purchase documentation
Claim
- Claim submitted
- Supplier response
- Replacement / repair
- Cost responsibility
- Closure
AM-18 Calibration Record Record
Purpose
Maintains calibration information for test and measurement equipment associated with AGL asset management, so readings stay traceable and trustworthy.
Equipment
- Instrument ID
- Instrument type
- Manufacturer
- Model
- Serial number
- Range
- Accuracy
Calibration
- Calibration date
- Calibration certificate
- Calibration laboratory
- Due date
- Calibration status
Verification & Status
- Certificate valid
- Instrument condition
- Calibration within required range
- Next calibration due
- Status: Valid / Due / Expired / Out of calibration
E · Risk & Performance
4 of 4 formsAM-19 Replacement Planning Sheet Planning Sheet
Purpose
Establishes a forward-looking asset replacement plan across a defined planning horizon, ranked by condition, health and criticality.
Fields
- Asset ID
- Equipment
- Installation date
- Age
- Expected service life
- Current condition
- Health score
- Failure history
- Criticality
- Replacement year
- Estimated cost
- Priority
Replacement Drivers
- End of useful life
- Repeated failure
- Obsolescence
- Poor performance
- Spare availability
- Manufacturer support
- Safety
- Energy efficiency
Planning Horizon
- 1 year
- 3 years
- 5 years
- 10 years
AM-20 Asset Criticality Assessment Assessment
Purpose
Determines the importance of an asset to airport / AGL operations, from limited operational consequence to major safety consequence.
Assessment Factors
- Safety — effect on aviation safety
- Operational impact — effect on runway/taxiway availability
- Failure consequence
- Redundancy — availability of alternative equipment/system
- Maintainability — ease and speed of repair
- Failure probability — historical likelihood
Criticality Classes
- C1 — Low: limited operational consequence
- C2 — Moderate: manageable operational impact
- C3 — High: significant operational impact
- C4 — Critical: major operational / safety consequence
Output
- Criticality score
- Criticality class
- Required maintenance strategy
- Monitoring requirement
- Spare strategy
AM-21 Asset Risk Register Register
Purpose
Maintains centralized risk information for AGL assets — hazard, probability, consequence and existing control against each recorded risk.
Fields
- Asset
- Hazard / failure
- Probability
- Consequence
- Risk
- Existing control
- Action
- Owner
Risk Categories
- Electrical
- Operational
- Safety
- Environmental
- Reliability
- Obsolescence
- Spare availability
- Maintenance
- Cyber / control system where applicable
Risk Treatment
- Monitor
- Mitigate
- Repair
- Upgrade
- Replace
- Retire
AM-22 Asset Performance Record Record
Purpose
Monitors actual performance of assets throughout their operational life against reliability metrics and target trends.
Performance Indicators
- Availability
- Reliability
- Failure frequency
- Downtime
- Maintenance frequency
- Energy consumption
- Output / performance
- Alarm frequency
- Photometric performance where applicable
Reliability Metrics
- MTBF
- MTTR
- Failure rate
- Availability %
Trend
- Current performance
- Previous performance
- Target
- Deviation
- Corrective action
F · Failure & Cost History
3 of 3 formsAM-23 Asset Failure History History Log
Purpose
Maintains a consolidated history of every significant failure associated with an asset, feeding failure frequency and MTBF/MTTR trend analysis.
Log Fields
- Date
- Failure ID
- Failure mode
- Cause
- Downtime
- Action
- Cost
- Status
Information
- Failure date
- Failure mode
- Failed component
- Root cause
- Corrective action
- Restoration time
- Repeat failure
- RCA reference
Analysis
- Failure frequency
- Recurring failures
- Failure trend
- MTBF
- MTTR
- Lifecycle impact
AM-24 Asset Cost History History Log
Purpose
Maintains the lifecycle cost history of an asset — acquisition through operation, maintenance, repair, upgrade, replacement and disposal.
Cost Categories
- Procurement
- Transportation
- Installation
- Commissioning
- Preventive maintenance
- Corrective maintenance
- Spare parts
- Repair
- Replacement
- Upgrade
- Energy / operational cost where available
- Disposal
Cost Record
- Date
- Activity
- Cost type
- Description
- Amount
- Reference
Lifecycle Cost
- Total Lifecycle Cost = Acquisition + Installation + Operation + Maintenance + Repair/Upgrade + Replacement + Disposal
AM-25 Asset Lifecycle Summary Summary
Purpose
A single-page management summary of a critical AGL asset's identity, lifecycle, condition, reliability, maintenance and financial position — ending in a clear lifecycle decision.
Identity & Lifecycle
- Asset ID, equipment, manufacturer, model, serial number, location, circuit
- Procurement / installation / commissioning date, warranty, current age, expected life, remaining life
Condition & Reliability
- Current condition, health score, criticality, risk rating
- Failure count, MTBF, MTTR, downtime, repeat failures
Maintenance & Financial
- PM compliance, corrective maintenance, maintenance cost, major repairs
- Acquisition, maintenance, repair, upgrade cost, replacement estimate, lifecycle cost
Lifecycle Decision
- Continue operation
- Increased monitoring
- Repair
- Upgrade
- Replacement planning
- Immediate replacement
How Division 11 Connects
These 25 forms carry an AGL asset from identification to disposal, and consolidate everything else the library records about it along the way.
Asset Lifecycle Flow
The six categories in this division follow the physical life of an asset:
Related Divisions
- Division 05 — Inspection Forms (inspection history, condition, defects)
- Division 06 — Testing Forms (test results and performance baseline)
- Division 08 — Maintenance Forms (PM, corrective work, repair, replacement)
- Division 09 — Failure Investigation Forms (failure mode, RCA, recurring failures)
- Division 10 — QA/QC Forms (NCR, CAPA, material and workmanship quality)
Frequently Asked Questions
Quick answers about the 25 Division 11 Asset Management forms, how they are grouped, and how they connect to the rest of the library.
Q1What is Division 11 — Asset Management Forms in the AGL Engineering Forms & Templates library?
Division 11 is a set of 25 asset management forms (AM-01 to AM-25) in the AGL Engineering Forms & Templates library. It tracks an AGL asset from identification and commissioning through operation, inspection, maintenance, modification, failure, upgrade, replacement and final disposal. The forms are grouped into 6 categories: Identification & Registration, History & Condition, Lifecycle Control, Warranty & Calibration, Risk & Performance and Failure & Cost History.
Q2Which forms are included in Identification & Registration, History & Condition and Lifecycle Control?
Identification & Registration (4 forms): AM-01 Asset Register, AM-02 Asset Identification Form, AM-03 Asset Tagging Record, AM-04 Asset Location Record; History & Condition (4 forms): AM-05 Asset Inspection History, AM-06 Equipment History Card, AM-07 Asset Condition Record, AM-08 Asset Health Record; Lifecycle Control (7 forms): AM-09 Asset Lifecycle Record, AM-10 Asset Transfer Form, AM-11 Asset Handover Record, AM-12 Asset Modification Record, AM-13 Asset Upgrade Record, AM-14 Asset Replacement Record, AM-15 Asset Disposal Record.
Q3Which forms are included in Warranty & Calibration, Risk & Performance and Failure & Cost History?
Warranty & Calibration (3 forms): AM-16 Warranty Register, AM-17 Warranty Claim Form, AM-18 Calibration Record; Risk & Performance (4 forms): AM-19 Replacement Planning Sheet, AM-20 Asset Criticality Assessment, AM-21 Asset Risk Register, AM-22 Asset Performance Record; Failure & Cost History (3 forms): AM-23 Asset Failure History, AM-24 Asset Cost History, AM-25 Asset Lifecycle Summary.
Q4What is the difference between the Asset Register, Asset Identification Form, Asset Tagging Record and Asset Location Record?
The Asset Register (AM-01) is the master controlled register and single source of truth for every AGL asset. The Asset Identification Form (AM-02) creates an asset's initial technical identity, verified against its nameplate. The Asset Tagging Record (AM-03) controls physical tagging and confirms the tag matches the register, and the Asset Location Record (AM-04) establishes the exact location and system relationship and tracks relocations.
Q5What is the difference between an asset's condition, health, criticality and risk records?
The Asset Condition Record (AM-07) documents the physical and operational condition of an asset at a defined point in time. The Asset Health Record (AM-08) gives an overall health assessment using condition, inspection, testing, maintenance and failure information. The Asset Criticality Assessment (AM-20) determines the asset's importance to airport and AGL operations, and the Asset Risk Register (AM-21) keeps hazard, probability, consequence and existing control information for each asset.
Q6Which forms control changes to an asset over its life?
The Asset Transfer Form (AM-10) transfers an asset between locations, departments, systems or responsible parties. The Asset Modification Record (AM-12) records approved modifications and their technical impact, the Asset Upgrade Record (AM-13) documents modernization, and the Asset Replacement Record (AM-14) documents replacing an asset. The Asset Disposal Record (AM-15) documents retirement and disposal, including closure of the register entry.
Q7Can the forms in Division 11 be downloaded and filled in?
Yes. Each form has a Download as Word button that produces an uncontrolled sample Word template with letterhead, a document-control block, ruled entry fields and a three-tier approval table, ready to print or fill on-screen. Checklist-format forms such as Asset Handover Record (AM-11) download with a checkbox and a verified-by line for each item. The forms can also be searched by keyword or form ID.
Q8How does Division 11 connect to the other divisions?
The Asset Register tells you what assets you have, while Division 11 tells you where they are, what condition they are in, how they have performed, what they have cost, what has failed, what risk they carry and when they should be repaired, upgraded or replaced. It is the master reference layer that the inspection, testing, maintenance, failure investigation and QA/QC records feed into.
TRACK THE ASSET. UNDERSTAND ITS LIFECYCLE.
An asset register tells you what exists — but managing an AGL asset base means understanding component lifecycles, replacement planning and the engineering behind every fixture, transformer and cable on the list.
Take your knowledge further with Precision AGL Academy.
Build Complete AGL Project Capability
Learn how technical AGL work connects with:
Develop the knowledge to not only record the work, but understand the engineering and project-management principles behind it.
Plan the project. Understand the engineering. Deliver with confidence.
Follow the Academy
Important Notice, Disclaimer & Limitation of Liability
Please read before relying on any content on this page or on any template downloaded from it.
- Purpose and intended users. This page is an independent educational and informational reference for competent, suitably trained and authorised airfield ground lighting (AGL), aerodrome electrical and project personnel. It is not professional engineering, legal or regulatory advice, and using it does not create any professional or client relationship.
- Sample templates, not controlled documents. Forms, checklists, registers, reports, certificate layouts and Word downloads are generic samples. They are uncontrolled copies and are not approved work instructions, procedures, permits, certificates, test or calibration records, or regulatory records. Letterheads, form numbers, revision labels, dates, document-control blocks and approval tables are layout only. Review and adapt a template under your own document-control system before any use; signatures on it carry no authority unless made under your own approved system. Precision AGL Academy does not issue, approve, certify or take responsibility for any record completed using a template, and does not receive or store such records.
- Safety. Work on series circuits, constant current regulators (CCRs), isolating transformers, cables, connectors and control equipment can be fatal. Always apply the aerodrome’s permit-to-work and isolation/LOTO procedures, prove dead, use correctly rated instruments and PPE, and follow the manufacturer’s instructions. Nothing here authorises work on live equipment or the bypassing of any safety device or interlock.
- Certificates, approvals and compliance. A completed template is not a certificate, approval, acceptance, release, permit or evidence of compliance, and listing a certificate, approval or sign-off field does not make the document valid. Reading this material or completing a template confers no certification, accreditation, competency assessment or authorisation to work on any aerodrome.
- Aviation operations. Nothing here authorises return to service, a change of operating category (CAT I/II/III), a NOTAM, a flight-inspection outcome or any aerodrome certification decision. These rest with the aerodrome operator, the air navigation service provider and the competent regulator.
- Standards, regulations and contracts. References to ICAO, FAA, IEC, IEEE, ISO, BIS, DGCA and other standards are for orientation only. They are summarised, may be incomplete or out of date, and standards are revised from time to time. Consult the current official editions. Following this content does not guarantee compliance with any law, standard, contract or regulatory approval. Contract, specification and official requirements always prevail, and nothing here is a contract document or legal advice.
- Personal and confidential data. Some templates have fields for names, signatures, training or competency records, and incident or injury details. If you record personal or confidential information on a template, you are responsible for handling it lawfully, including under India’s Digital Personal Data Protection Act, 2023 and your contracts. Word files are generated in your browser; the content you enter is not sent to us.
- Generic content; no warranty. Field lists, sequences, categories and example values are generic and indicative; real projects, installations and contracts differ. Content is provided “as is” and “as available”, without warranty of any kind, express or implied, including accuracy, completeness, currency or fitness for a particular purpose.
- Limitation of liability. To the fullest extent permitted by applicable law, Precision AGL Academy and its owners, authors and contributors are not liable for any injury, death, loss, damage, downtime, penalty, contractual dispute or regulatory consequence, whether direct or indirect, arising from the use of, reliance on, or inability to use this content or any template downloaded from it. Nothing in this notice excludes or limits any liability that cannot lawfully be excluded or limited.
- Independence and trademarks. This is an independent publication, not affiliated with or endorsed by ICAO, the FAA, the IEC, BIS, DGCA, any airport, regulator, certification body or equipment manufacturer. Third-party names, standard designations and trademarks, including Microsoft Word and Excel, belong to their respective owners and are used for identification only.
- Copyright and use. © 2026 Precision AGL Academy. All rights reserved. You may view this page and use downloaded templates for personal reference, internal training and, once adapted under your own document-control system, your own internal project records, keeping this notice attached to unadapted copies. You may not present them as approved or controlled documents, or copy, republish, redistribute, scrape or commercially use the library without our prior written permission.
- Corrections. Content is reviewed periodically, with no obligation to update. To report an error, safety concern or rights issue, write to precisionaglsolutions@gmail.com.