What Is Airfield Ground Lighting Training?
Specialised education on airport lighting and its electrical infrastructure: functions, engineering principles, installation, testing and maintenance. Whether you call it an airfield lighting course, an airport lighting course or an airfield ground lighting course, the programme may include lessons, drawings, calculations, case studies, assignments, simulated faults and equipment demonstrations.
Airfield lighting systems
Runway edge, centreline, threshold and end lights; taxiway lighting; approach and touchdown zone lighting; runway guard lights, stop bars, PAPI and signs.
Electrical infrastructure
CCR operation, constant-current series circuits, isolating transformers, cables, connectors, insulation testing, earthing and counterpoise, surge and lightning protection, and electrical safety.
Engineering design
Layouts, circuit arrangements, cable selection, voltage-drop calculations, equipment schedules, specifications and quantity estimation.
Photometry and testing
Luminous intensity, beam alignment, chromaticity, measurement principles, test equipment, calibration considerations and reporting.
Maintenance and fault diagnosis
Systematic inspection, defect identification, circuit fault investigation, alarm interpretation and maintenance records.
Standards and documentation
ICAO provisions, FAA advisory circulars, DGCA requirements and airport specifications, with compliance matrices, test reports and handover files.
AGL Training Courses Offered by Precision AGL Academy
Programmes organised by level of technical knowledge, as listed on the Academy's main course page.
Master Diploma in Airfield Ground Lighting Engineering
Covers aviation fundamentals and lighting systems through electrical infrastructure, design, testing, maintenance and project documentation. Suited to learners who want broad AGL engineering knowledge rather than one subject.
- ICAO and FAA technical references, CCR systems
- Design calculations, photometry, commissioning
- ALCMS and SCADA fundamentals, BOQ and tenders
- Preventive maintenance, troubleshooting, case studies
- 10 assignments, capstone project, practical assessment and final exam (confirm the format of the practical assessment with the Academy)
- Instructor guidance and Academy-issued certificate
Advanced AGL Design & Compliance Program
ICAO Annex 14 and Doc 9157, FAA standards, CAT I/II/III layouts, series circuits, voltage drop, shop drawings, compliance matrices and equipment submissions. For engineers, consultants and project professionals.
Explore AGL Design TrainingAGL Photometry Specialist Program
Luminous intensity, beam characteristics, chromaticity, alignment, goniometer concepts, test procedures, result interpretation and report preparation. Practical competency depends on the facilities in the training arrangement.
Explore AGL Photometry TrainingAirport Lighting Maintenance Engineer Program
Inspection principles, preventive and corrective maintenance, CCR fault indications, transformer, cable and connector faults, defect reports and return-to-service considerations.
Explore AGL Maintenance TrainingProfessional AGL Courses and Short-Term Training
Concentrate on one area of airport engineering without committing to a longer programme.
Aviation & Airport Fundamentals
Airport operations, airside infrastructure, terminology and the role of electrical systems.
Airfield Ground Lighting Fundamentals
Major lighting systems, purposes, operating principles and links to airport operations.
AGL Electrical Systems
CCRs, series circuits, isolating transformers, cables, connectors and associated infrastructure.
Airport Automation & Control Systems
Lighting control, monitoring, system interfaces, status indications and alarm management.
Airport Electrical Design & Drawings
Engineering drawings, lighting layouts, electrical arrangements and technical documentation.
Airport Tender & BOQ Preparation
Bills of quantities, specifications, material schedules and tender documentation.
Airfield Lighting Training by System: Runway, Taxiway, Approach & Circuits
Each topic below is taught as a module inside the Academy programmes. Pick the course that covers the system you work on.
Runway Lighting Training & Runway Lighting Course
Edge, threshold, runway-end, centreline and touchdown zone lighting: configurations, operating purposes and how each system fits the airfield.
View coursesRunway Edge Lights Training & Runway Edge Lights Course
Runway edge light function, series-circuit connection, inspection, defect identification and fault finding.
View coursesTaxiway Lighting Training & Taxiway Lighting Course
Taxiway edge and centreline lighting, stop bars, runway guard lights, rapid exit taxiway indicators and guidance signs.
View coursesApproach Lighting Training & Approach Lighting Course
Approach lighting layouts and their operational purpose, with the visual guidance links to PAPI and touchdown zone lighting.
View coursesConstant Current Regulator Training & Constant Current Regulator Course
CCR operating principles, series circuit architecture, brightness steps, loading, alarms and troubleshooting concepts.
View coursesAirfield Lighting Isolation Transformer Training & Airfield Lighting Isolation Transformer Course
Isolating transformer function and selection, secondary circuits, continuity and insulation testing concepts.
View coursesAirfield Lighting Cable Training & Airfield Lighting Cable Course
Primary and secondary cables, L-823 plug and receptacle systems, joints, insulation and fault-location concepts.
View coursesAirfield Lighting Control System Training, Airfield Lighting Control System Course & ALCMS Course
ALCMS architecture, CCR control and monitoring, alarms, status indications, event records and system interfaces.
View coursesAGL Courses by Skill and Job Role
Match the training to what you do on site or in the design office.
Airfield Lighting Engineering Course
The broad pathway for learners who want the whole AGL system in one programme: fundamentals through design, testing, maintenance and documentation.
View coursesAirfield Lighting Design Course
Layouts, circuit arrangements, equipment schedules, specifications and compliance, as in the Advanced AGL Design & Compliance Program.
View coursesAGL Electrical Calculations Course
Series-circuit loading, cable selection and voltage-drop calculations, with quantity estimation and BOQ.
View coursesAirport Electrical Systems Course
CCRs, series circuits, isolating transformers, cables, connectors and associated infrastructure, as in AGL Electrical Systems.
View coursesAGL Technician Training
Inspection routines, component identification, test instruments, defect reports and safe working practice for field technicians.
View coursesAirport Lighting Maintenance Training
Preventive and corrective maintenance, defect classification, return-to-service considerations and maintenance records.
View coursesAirport Lighting Troubleshooting Training
CCR trip investigation, open-circuit diagnosis, transformer, cable and connector faults, water ingress and alarm interpretation.
View coursesAirfield Lighting Practical Training
Component identification, demonstrations, test instruments and simulated faults. Confirm practical equipment access before you enrol.
View coursesAirfield Lighting Standards Training
ICAO Annex 14 and Doc 9157, FAA AC 150/5340 and 150/5345 series, DGCA requirements and compliance matrices.
View coursesAirport Electrical Engineer Training
For electrical engineers moving into airport work: lighting circuits, CCRs, components and technical documentation.
View coursesAirfield Lighting Training for Engineers
Project, commissioning, consulting and contractor engineers: installation requirements, test records and handover files.
View coursesAirport Lighting Engineer Course India
Online programmes for engineers in India, from fundamentals to the six-month Master Diploma. Confirm current fees and schedule with the Academy.
View coursesOnline vs Practical and Classroom Training
The right option depends on your objectives and the hands-on experience you need.
AGL Online Course & Airfield Lighting Course Online India
Best for theory and principles: system fundamentals, components, ICAO/FAA references, design calculations, photometry methodology, maintenance theory and BOQ documentation. Flexible for working professionals.
Practical AGL training
Component identification, CCR and transformer demonstrations, cable and connector familiarisation, test instruments, simulated faults and photometric equipment. Work on energised or operational equipment must follow authorised procedures and safety controls. Series circuits carry dangerous current and voltage: never open, disconnect or touch a live circuit; isolate, lock out, earth and test before work.
Classroom and on-site training
Useful for organisations training engineering, maintenance or project teams. Evaluate trainer, syllabus, facilities, location, duration, practical activities and assessment.
AGL Course Syllabus: Important Technical Modules
A comprehensive pathway connects individual components with the complete airport lighting system. Open a module to see its topics.
M1Aviation and Airport Fundamentals
- Airport infrastructure and airside terminology
- Runways, taxiways and aprons
- Operational environments
- Introduction to visual aids and electrical systems
M2Runway Lighting Systems
- Edge, threshold, runway-end and centreline lighting
- Touchdown zone and approach lighting
- Configurations and operational purposes
M3Taxiway Lighting Systems
- Taxiway edge and centreline lighting
- Stop bars and runway guard lights
- Rapid exit taxiway indicators
- Guidance and sign systems
M4Visual Guidance Systems
- PAPI and visual approach guidance principles
- Airfield signs and guidance lighting
- Operational functions of visual aids
M5CCR and Series Circuit Engineering
- CCR operating principles
- Series circuit architecture, brightness steps, loading
- Open-circuit and insulation-fault principles
- CCR alarms and troubleshooting concepts
M6Isolating Transformers, Cables and Connectors
- Transformer functions and selection
- Primary and secondary cables
- L-823 plug and receptacle systems
- Joints, insulation and continuity testing concepts
- Earthing, counterpoise and surge protection principles
M7AGL Design and Calculations
- Layout interpretation, circuit planning, schedules
- Cable selection and voltage-drop calculations
- Technical drawings, quantity estimation and BOQ
M8Photometry and Testing
- Terminology, luminous intensity, beam distribution
- Chromaticity, beam alignment, goniometer principles
- Test procedures, records and report interpretation
M9ALCMS and Airport Automation
- ALCMS architecture and functions
- Field equipment, CCR control and monitoring
- Alarms, status indications, event records
- System interfaces and operating procedures
M10Maintenance and Troubleshooting
- Daily inspection, defect classification, preventive planning
- CCR trip investigation, open-circuit diagnosis
- Transformer, cable and connector faults; water ingress
- Defect reports and corrective actions
M11Standards and Compliance
- ICAO Annex 14 and Doc 9157
- ICAO Aerodrome Design Manual (Doc 9157) and Airport Services Manual Part 5 (Doc 9137), as applicable
- FAA AC 150/5340 and 150/5345 series
- IEC standards for AGL series circuits, CCRs, isolating transformers and maintenance (IEC 61820 to 61823 family)
- DGCA CAR requirements, AAI practice and airport specifications
- Compliance matrices and inspection documentation
M12Project Documentation and Handover
- Specifications, BOQs, material schedules, submittals
- Inspection and test reports, snag lists
- Commissioning documents, as-builts, handover records
ALCMS Training and Advanced AGL Engineering
An ALCMS-focused course explains how the control system interfaces with field equipment and CCRs, displays status, presents alarms and supports authorised operator actions.
- ALCMS architecture and system components
- CCR control and monitoring interfaces
- Alarm interpretation and event logs
- Circuit status indications; interlocks
- SCADA fundamentals, where applicable
- Communication and monitoring troubleshooting
- Fault and corrective-action documentation
Other advanced subjects: circuit engineering, equipment selection, electrical calculations, photometric assessment, compliance and commissioning documentation.
AGL Course Fees and AGL Training in India
Cost varies with duration, technical depth, format, practical equipment access and assessment requirements.
What should an AGL course fee include?
- Complete syllabus and learning materials
- Video lessons or instructor-led sessions
- Assignments and assessment
- Practical demonstrations, equipment or lab access, if applicable
- Course access duration and certificate of completion
- Additional examination or workshop charges
Compare learning outcomes, technical depth and practical arrangements, not just price.
Need a current quotation?
Confirm today's fees, inclusions and schedule directly with the Academy.
Enquire About Current FeesCertification and Course Completion
Different certificates represent different levels of assessment and recognition. The Academy lists programme-specific certificates of completion; depending on the programme, the pathway may include assignments, a capstone project, practical assessment or a final examination.
What does an Academy-issued certificate mean?
It documents completion of the programme according to the Academy's requirements.
- The name of the certificate issued
- Whether an examination or practical assessment is required
- The completion criteria and the issuer
- How it relates to your intended job or employer requirements
Verify an Academy certificate · Understand AGL career and certification pathways
Airfield Lighting Certification Course & Airfield Lighting Certification India
An airfield lighting certification course from the Academy ends in an Academy-issued certificate once the programme's assessments are complete. For airfield lighting certification India employers or airports may ask for, check their own requirements first.
AGL Certification Requirements
AGL certification requirements differ by programme and by employer. Typical items to confirm: completion of lessons and assignments, any practical assessment or final exam, and site-specific authorisation, which the airport operator controls.
Who Should Take an AGL Training Course?
Prior airport experience is not necessarily required for introductory courses. Advanced courses may require electrical fundamentals or technical experience.
Electrical Engineers
Airport lighting circuits, CCRs, components and technical documentation.
AGL Engineers & Technicians
Operation, inspection, testing, maintenance and fault diagnosis.
Airport Maintenance Teams
Preventive maintenance, defect reporting and troubleshooting.
Project & Commissioning Engineers
Installation requirements, inspections, test records and handover.
Consultants & Design Engineers
Layouts, calculations, specifications and compliance review.
Contractors & EPC Teams
Equipment, installation interfaces, schedules and commissioning.
Students & Fresh Graduates
Foundations in aviation infrastructure before an airport engineering role.
How to Choose the Right AGL Course
Start with your current knowledge and the skills you want to build.
Start with the fundamentals
Aviation & Airport Fundamentals or Airfield Ground Lighting Fundamentals.
View Electrical backgroundGo deeper on circuits
AGL Electrical Systems, or the Master Diploma for broader depth.
View DesignAdvanced AGL Design & Compliance
For layouts, calculations and compliance documentation.
View TestingAGL Photometry Specialist
For beam, colour and measurement reporting work.
View MaintenanceAirport Lighting Maintenance Engineer
For inspection, fault finding and defect records.
View Project documentsDesign & Drawings, Tender & BOQ
Airport Electrical Design & Drawings and Airport Tender & BOQ Preparation. For broad knowledge, review the Master Diploma curriculum first.
ViewCareer Opportunities After AGL Training
Specialised AGL knowledge can support development in airport infrastructure roles, depending on your qualifications, experience and employer requirements.
Frequently Asked Questions About AGL Training
Q1Can I learn Airfield Ground Lighting online?
Q2Is AGL training suitable for beginners?
Q3Is AGL training available in India?
Q4What are the fees for AGL training in India?
Q5Does an AGL course provide certification?
Q6Are ICAO and FAA standards covered?
Q7Does online training include practical equipment?
Q8How long does an AGL training course take?
Q9Is previous airport experience required?
Q10Will AGL training guarantee a job?
Q11Can I study AGL photometry separately?
Q12How can I enrol in an AGL course?
Q13What does an airfield lighting engineering course cover?
Q14Is there an airfield lighting certification course in India?
Q15What are the AGL certification requirements?
Q16Is there an AGL training manual?
Q17Is Precision AGL Academy an airfield lighting training institute?
Q18What does an airfield ground lighting course or airport lighting course teach?
Start Your AGL Learning Journey
Precision AGL Academy was founded by Rahul Sharma to support structured learning in Airfield Ground Lighting. Courses bring together fundamentals, electrical infrastructure, design, photometry, maintenance, troubleshooting and documentation, and are intended to complement formal education, workplace experience and operational training.
Explore the courses, compare syllabuses and confirm current fees and arrangements before enrolment.
A typical learning pathway
Fees & Outcomes Notice
Fees quoted are indicative, in Indian Rupees, and exclude GST and other applicable taxes unless stated otherwise; the final fee is confirmed at enrollment. Training does not guarantee employment, promotion or eligibility for a specific role. ICAO, FAA, IEC, BIS and other names and documents belong to their respective owners; Precision AGL Academy is not affiliated with or endorsed by them. Standards references are summaries for learning and are not a substitute for the current, officially published documents.
See the Terms & Conditions, Refund Policy, Privacy Policy and Standards Disclaimer.